I am running the image on an SD card using the scsi SD adapter made by that cleaver Australian guy linked to and spoken about on this very list. Make sure you have updated the BIOS chip if you are using a 9100a as the early released did not support the software the later image was made from. I sent John a dump of the latest firmware V1.3 for the 9100ft and it is on the FTP. Andy has put together a brilliant resource on his website including the process to upgrade the ROMS. Steve Larkins Mobile 07826 553792 On 8 December 2015 at 06:48, Tony Jones <tony@tonyjones.com> wrote:
On Mon, Dec 7, 2015 at 9:30 PM, Andrew Welburn <andy@andysarcade.net> wrote:
Not sure where you're getting the 100mb limit from?
http://www.andys-arcade.net/personal/tech/fluke9100/index.htm
task 13 ..... "and the fluke can't see anything above 100mb anyway!" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/