I've set up my KryoFlux disc reader and it is creating good copies of my Fluke 9100 floppies, but I can't figure out how to write to them using KryoFlux. I have it setup in the GUI on my Mac with these settings and it works just fine, making good image files like uut_test.img. The problem is I can't seem to write the files to floppies using the same interface. I tried: dtc -fuut_test.img -v300 -z1 -i4 -w but I get: Image name: Can't open image file: I've been poking around the https://forum.kryoflux.com/ but as they haven't gotten around to letting me log in it is really, really slow to search - have to wait around 80 seconds between searches. So I thought maybe someone here has the answer... I will post the answer here once I either figure it out or someone tells me what it is. The floppy drive I am using is from the 90s and works just fine. Thanks! John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site 2005-Current: https://seven.pairlist.net/pipermail/techtoolslist/ Vectorlist Archives 1997/99 - 2016: https://www.vectorlist.org/