Going from memory here but I believe you can get away with a standard ribbon cable and 40 pin DIP IDC in a pinch until you can source a replacement. I seem to recall from many years ago that was what I used on one of my pods until I replaced it. Best Regards, Bill

On Mar 12, 2020, at 2:41 PM, Tony Jones <tony@tonyjones.com> wrote:

I have 2 or 3 NOS ones. I'd have to check.

...

On Thu, Mar 12, 2020 at 12:08 PM Marc Desfossés <mdesfoss@hotmail.com> wrote:

Hi,

Does anyone have a spare cable to replace the header on a 40 pins Z80 pod ? Just got one of ebay and it was damaged during shipping.

Thanks

Marc

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/