Actually, I've got that covered, I have a switching power supply running along with Tom W's MCR adapter kit. Pretty sure the reset signal is hooked up to the Cheap Squeak, but I'll double check. Anthony --Anthony Pietrak www.QuarterArcade.com Restored Arcade Games for your Home

-----Original Message----- From: Chris Hardy [mailto:chris@hardys.plus.com] Sent: Tuesday, April 26, 2005 12:45 PM To: anthony@quarterarcade.com; Technical Tools Mail List Subject: Re: [Techtoolslist] Spy Hunter Cheap Squeak Wiring?

The PSU supplies a reset pulse to the game board and the cheap squeak music board.

You can get around this by manually connecting the reset pin on the cheap squeak to +5v ( or was it ground, I don't recall)

Either way, you cant just get away with tying the line to +5v (or ground), it has to be a pulse

Chris

(had me going for quite a while the last time I fixed a Spy Hunter sound board)

----- Original Message ----- From: "Anthony Pietrak" <anthony@quarterarcade.com> To: <techtoolslist@flippers.com> Sent: Tuesday, April 26, 2005 5:17 PM Subject: [Techtoolslist] Spy Hunter Cheap Squeak Wiring?

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist