i don't have a working teledisk set-up at the moment or i'd do that.. its hit and miss getting anything to work with teledisk in my experience. i forget the combintation (maybe its on my fluke page ;) but i may try this when i return.. i'm overseas right now, back in a week or so.. Andrew Welburn http://www.andys-arcade.com On 13/02/2017 06:58, Mike Coates wrote:

Hi Andy, if you could send me an teledisk image of the floppy with a test program on then I can write it out to a disk and then run it from there or copy it to the hard disk.

Thanks Mike

On 06/02/2017 16:56, Andrew Welburn wrote:

...

If you had a TL/1 program written and stored that only opened the keyboard channel for input you could spit out chars to the VFD for a test...

But its a bit chicken and egg.. i could write it and paste it here, but you couldn't put it onto your 9100 over serial without a keyboard/videocard to put it into /proglib..

I could send you a floppy with the program on it, or someone with a working setup could do the serial thing and create a floppy for you, you then copy the floppy contents (the test program) to /proglib.

Or, someone over there in the UK who knows how to write a quick keyboard->character dump does it for you ;)

let me know if you need help...

Andrew Welburn andys-arcade

---

Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/