Andy, Here is a cheapy Arduino->Gpib controller... Make sure you read the disclaimer :P http://egirland.blogspot.it/2014/03/arduino-uno-as-usb-to-gpib-controller.ht ml Although, was made for the TEK2232 and HP853 William Stillwell Hamster / KI4SWY Stillwell Software Solutions. Free Play Florida Arcade & Pinball Show Organizer -----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Andy Smout Sent: Monday, March 23, 2015 6:55 AM To: techtoolslist@flippers.com Subject: Re: [Techtoolslist] Fwd: Re: Fluke 9000 series manual wanted - Remote Operation, publication B0147 good thinking william! that gives me a starting point to read up on some commands. at least the standard 488 commands are there on the 9110ft. i'll dig a little deeper :) _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/