I think this was asked before and I didn't have Windows 7 at the time so I didn't follow it, so I apologize, but I need to ask again. Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work? Joe _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Hi Joe, I wrote up this forum post about getting the 29B working on Vista x64. This should cover Win7 x86/x64 too. http://ukvac.com/forum/using-a-data-io-on-a-modern-system-other-tricks_topic... Cheers Tim Sent from my iPhone, please excuse typos. On 22 Jun 2013, at 22:50, "Joe Magiera" <joemagiera@ameritech.net> wrote:
I think this was asked before and I didn't have Windows 7 at the time so I didn't follow it, so I apologize, but I need to ask again.
Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work?
Joe
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I have a Windows 7 64bit system and it was pretty easy to install and run the XPmode virtual system with the following easy instructions. http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-... Using a USB to serial adapter and a null modem I was able to run promlink to my Data I/O 29b Unipak and read/write eproms, save the data and have them verified with romident. Matt On 6/22/2013 4:17 PM, Tim Matthews wrote:
Hi Joe,
I wrote up this forum post about getting the 29B working on Vista x64. This should cover Win7 x86/x64 too.
http://ukvac.com/forum/using-a-data-io-on-a-modern-system-other-tricks_topic...
Cheers Tim
Sent from my iPhone, please excuse typos.
On 22 Jun 2013, at 22:50, "Joe Magiera" <joemagiera@ameritech.net> wrote:
I think this was asked before and I didn't have Windows 7 at the time so I didn't follow it, so I apologize, but I need to ask again.
Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work?
Joe
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I'm curious if anyone has tried using Dosbox since promlink runs in a dos window. I believe Dosbox is window and vista 64 compliant. Kevin On Mon, Jun 24, 2013 at 7:33 PM, Matthew Rossiter <matt@rossiters.com>wrote:
I have a Windows 7 64bit system and it was pretty easy to install and run the XPmode virtual system with the following easy instructions.
http://windows.microsoft.com/**en-us/windows7/install-and-** use-windows-xp-mode-in-**windows-7<http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7>
Using a USB to serial adapter and a null modem I was able to run promlink to my Data I/O 29b Unipak and read/write eproms, save the data and have them verified with romident.
Matt
On 6/22/2013 4:17 PM, Tim Matthews wrote:
Hi Joe,
I wrote up this forum post about getting the 29B working on Vista x64. This should cover Win7 x86/x64 too.
http://ukvac.com/forum/using-**a-data-io-on-a-modern-system-** other-tricks_topic328612.html<http://ukvac.com/forum/using-a-data-io-on-a-modern-system-other-tricks_topic328612.html>
Cheers Tim
Sent from my iPhone, please excuse typos.
On 22 Jun 2013, at 22:50, "Joe Magiera" <joemagiera@ameritech.net> wrote:
I think this was asked before and I didn't have Windows 7 at the time so
I didn't follow it, so I apologize, but I need to ask again.
Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work?
Joe
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist> FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist> FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist> FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I use Promlink on Win 7 with DosBox and a usb to serial adapter. Its been a few years, but I think you need to change some settings for the com ports in Dosbox to make it work though. Brian On 6/24/2013 11:12 PM, Kevin Moore wrote:
I'm curious if anyone has tried using Dosbox since promlink runs in a dos window. I believe Dosbox is window and vista 64 compliant.
Kevin
On Mon, Jun 24, 2013 at 7:33 PM, Matthew Rossiter <matt@rossiters.com>wrote:
I have a Windows 7 64bit system and it was pretty easy to install and run the XPmode virtual system with the following easy instructions.
http://windows.microsoft.com/**en-us/windows7/install-and-** use-windows-xp-mode-in-**windows-7<http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7>
Using a USB to serial adapter and a null modem I was able to run promlink to my Data I/O 29b Unipak and read/write eproms, save the data and have them verified with romident.
Matt
On 6/22/2013 4:17 PM, Tim Matthews wrote:
Hi Joe,
I wrote up this forum post about getting the 29B working on Vista x64. This should cover Win7 x86/x64 too.
http://ukvac.com/forum/using-**a-data-io-on-a-modern-system-** other-tricks_topic328612.html<http://ukvac.com/forum/using-a-data-io-on-a-modern-system-other-tricks_topic328612.html>
Cheers Tim
Sent from my iPhone, please excuse typos.
On 22 Jun 2013, at 22:50, "Joe Magiera" <joemagiera@ameritech.net> wrote:
I think this was asked before and I didn't have Windows 7 at the time so
I didn't follow it, so I apologize, but I need to ask again.
Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work?
Joe
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist> FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist> FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist> FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
This person lists some of the serial options for dosbox. http://vogons.zetafleet.com/viewtopic.php?t=11431 The problem I'm having is when I enable the serial port, dosbox runs incredibly slow. I've tried different ports and settings. Did you have the same issue? Matt On 6/24/2013 9:18 PM, Brian P. Lucas wrote:
I use Promlink on Win 7 with DosBox and a usb to serial adapter. Its been a few years, but I think you need to change some settings for the com ports in Dosbox to make it work though.
Brian
On 6/24/2013 11:12 PM, Kevin Moore wrote:
I'm curious if anyone has tried using Dosbox since promlink runs in a dos window. I believe Dosbox is window and vista 64 compliant.
Kevin
On Mon, Jun 24, 2013 at 7:33 PM, Matthew Rossiter <matt@rossiters.com>wrote:
I have a Windows 7 64bit system and it was pretty easy to install and run the XPmode virtual system with the following easy instructions.
http://windows.microsoft.com/**en-us/windows7/install-and-** use-windows-xp-mode-in-**windows-7<http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7>
Using a USB to serial adapter and a null modem I was able to run promlink to my Data I/O 29b Unipak and read/write eproms, save the data and have them verified with romident.
Matt
On 6/22/2013 4:17 PM, Tim Matthews wrote:
Hi Joe,
I wrote up this forum post about getting the 29B working on Vista x64. This should cover Win7 x86/x64 too.
http://ukvac.com/forum/using-**a-data-io-on-a-modern-system-** other-tricks_topic328612.html<http://ukvac.com/forum/using-a-data-io-on-a-modern-system-other-tricks_topic328612.html>
Cheers Tim
Sent from my iPhone, please excuse typos.
On 22 Jun 2013, at 22:50, "Joe Magiera" <joemagiera@ameritech.net> wrote:
I think this was asked before and I didn't have Windows 7 at the time so
I didn't follow it, so I apologize, but I need to ask again.
Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work?
Joe
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I'm not having any speed issues and I'm using Dosbox 0.74 on Windows 7 Home Premium. The setting in Dosbox I used for the serial port was: serial1=directserial realport:com1 I'll have to dig out my 29b and see what its settings are. Brian On 6/25/2013 8:54 AM, Matthew Rossiter wrote:
This person lists some of the serial options for dosbox. http://vogons.zetafleet.com/viewtopic.php?t=11431
The problem I'm having is when I enable the serial port, dosbox runs incredibly slow. I've tried different ports and settings. Did you have the same issue?
Matt
On 6/24/2013 9:18 PM, Brian P. Lucas wrote:
I use Promlink on Win 7 with DosBox and a usb to serial adapter. Its been a few years, but I think you need to change some settings for the com ports in Dosbox to make it work though.
Brian
On 6/24/2013 11:12 PM, Kevin Moore wrote:
I'm curious if anyone has tried using Dosbox since promlink runs in a dos window. I believe Dosbox is window and vista 64 compliant.
Kevin
On Mon, Jun 24, 2013 at 7:33 PM, Matthew Rossiter <matt@rossiters.com>wrote:
I have a Windows 7 64bit system and it was pretty easy to install and run the XPmode virtual system with the following easy instructions.
http://windows.microsoft.com/**en-us/windows7/install-and-** use-windows-xp-mode-in-**windows-7<http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7>
Using a USB to serial adapter and a null modem I was able to run promlink to my Data I/O 29b Unipak and read/write eproms, save the data and have them verified with romident.
Matt
On 6/22/2013 4:17 PM, Tim Matthews wrote:
Hi Joe,
I wrote up this forum post about getting the 29B working on Vista x64. This should cover Win7 x86/x64 too.
http://ukvac.com/forum/using-**a-data-io-on-a-modern-system-** other-tricks_topic328612.html<http://ukvac.com/forum/using-a-data-io-on-a-modern-system-other-tricks_topic328612.html>
Cheers Tim
Sent from my iPhone, please excuse typos.
On 22 Jun 2013, at 22:50, "Joe Magiera" <joemagiera@ameritech.net> wrote:
I think this was asked before and I didn't have Windows 7 at the time so
I didn't follow it, so I apologize, but I need to ask again.
Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work?
Joe
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
That's the setting I have. I tried specifying other parameters as well, such as baud rate, etc. It looks like it's an issue with DosBox and my particular Trendnet TU-S9 USB/Serial adapter. I swapped in my Airlink 101 and it works perfect. Hmmm. Under XPmode they both work fine. The funny thing is, they both use the same software which I downloaded from trendnet. So DosBox seems to work ok. Matt On 6/25/2013 9:03 AM, Brian P. Lucas wrote:
I'm not having any speed issues and I'm using Dosbox 0.74 on Windows 7 Home Premium. The setting in Dosbox I used for the serial port was:
serial1=directserial realport:com1
I'll have to dig out my 29b and see what its settings are.
Brian
On 6/25/2013 8:54 AM, Matthew Rossiter wrote:
This person lists some of the serial options for dosbox. http://vogons.zetafleet.com/viewtopic.php?t=11431
The problem I'm having is when I enable the serial port, dosbox runs incredibly slow. I've tried different ports and settings. Did you have the same issue?
Matt
On 6/24/2013 9:18 PM, Brian P. Lucas wrote:
I use Promlink on Win 7 with DosBox and a usb to serial adapter. Its been a few years, but I think you need to change some settings for the com ports in Dosbox to make it work though.
Brian
On 6/24/2013 11:12 PM, Kevin Moore wrote:
I'm curious if anyone has tried using Dosbox since promlink runs in a dos window. I believe Dosbox is window and vista 64 compliant.
Kevin
On Mon, Jun 24, 2013 at 7:33 PM, Matthew Rossiter <matt@rossiters.com>wrote:
I have a Windows 7 64bit system and it was pretty easy to install and run the XPmode virtual system with the following easy instructions.
http://windows.microsoft.com/**en-us/windows7/install-and-** use-windows-xp-mode-in-**windows-7<http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7>
Using a USB to serial adapter and a null modem I was able to run promlink to my Data I/O 29b Unipak and read/write eproms, save the data and have them verified with romident.
Matt
On 6/22/2013 4:17 PM, Tim Matthews wrote:
Hi Joe,
I wrote up this forum post about getting the 29B working on Vista x64. This should cover Win7 x86/x64 too.
http://ukvac.com/forum/using-**a-data-io-on-a-modern-system-** other-tricks_topic328612.html<http://ukvac.com/forum/using-a-data-io-on-a-modern-system-other-tricks_topic328612.html>
Cheers Tim
Sent from my iPhone, please excuse typos.
On 22 Jun 2013, at 22:50, "Joe Magiera" <joemagiera@ameritech.net> wrote:
I think this was asked before and I didn't have Windows 7 at the time so > I > didn't follow it, so I apologize, but I need to ask again. > > > > Has anyone successfully got a Data I/O 29B to work on a Windows 7 > machine? > If so, any tips or tricks you can share that you had to do to > get it to > work? > > > > Joe > > ______________________________**_________________ > Techtoolslist mailing list > Techtoolslist@flippers.com > http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist> > > FTP site is: > ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> > Archive site: > http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/> > ______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
______________________________**_________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/**mailman/listinfo/techtoolslist<http://seven.pairlist.net/mailman/listinfo/techtoolslist>
FTP site is: ftp://ttl.arcadetech.org/TTL/**Test_Equipment<ftp://ttl.arcadetech.org/TTL/Test_Equipment> Archive site: http://seven.pairlist.net/**pipermail/techtoolslist/<http://seven.pairlist.net/pipermail/techtoolslist/>
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I recall that it won't work in 64-bit version. also maybe something about running in cmd shell and not launching directly from windows. Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work? david grohowski electronicamuse@aol.com _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Just throwing my two pence in... i've just retired my windows XP PC now because i tried out DOSbox on my win7x64 machine (which has an old fashioned DB9 serial port!) and it works great. On an older pc i had the same issue i'm getting now, if you turn the 29b on, and let it go into 'remote mode' and dont send it any commands in the first 30 seconds, you'll get an 'i/o timeout error 46' on the display, so you have to reboot it. Just turn the 29b on, run promlink and hit ctrl+p, this will just blip a command to the programmer to stop it timing out. The programmer is then good for the rest of the time you choose to use it, whether its doing stuff or idle, it wont timeout again. Strange little quirk, but i'm very happy it works great on DOSbox under win7 x64, very simple to setup, just run the config batch file and configure the com port and you're done! I mount d:\ as my roms directory on my hard drive, but you have to remember that promlink/dosbox only sees the file listing as it was when the program was first run, if you add or move files around in windows then drop back into dosbox/promlink, it wont see the file changes.. enjoy! Andrew Welburn http://www.andys-arcade.com On 22/06/2013 22:50, Joe Magiera wrote:
I think this was asked before and I didn't have Windows 7 at the time so I didn't follow it, so I apologize, but I need to ask again.
Has anyone successfully got a Data I/O 29B to work on a Windows 7 machine? If so, any tips or tricks you can share that you had to do to get it to work?
Joe
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
participants (7)
-
Andrew Welburn -
Brian P. Lucas -
david grohowski -
Joe Magiera -
Kevin Moore -
Matthew Rossiter -
Tim Matthews