Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed! The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time. Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2. I've also renamed the files and added the Fluke part numbers when they existed on the files. Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT. I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know. Also some TEAC notes on emulating a 720 drive. All now found in the TTL /Fluke/PDFs/9100_fixture directory. John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :) I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress... Andrew Welburn (mobile) www.andys-arcade.com On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote:
Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed!
The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time.
Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2.
I've also renamed the files and added the Fluke part numbers when they existed on the files.
Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT.
I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know.
Also some TEAC notes on emulating a 720 drive.
All now found in the TTL /Fluke/PDFs/9100_fixture directory.
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Along with the Fluke/PDFs/9100_fixture documents I have a copy of the instructions (PN885231 rv2) for the 9100A 40 mb Hard Disk Upgrade kit PN878801 (for Ver 6.0) - this document is still useful in that it talks to ROMs on the 9100A and versions required...it might be that Ver 6.0 requires a ROM upgrade as well. FTP site is: ftp://ttl.arcadetech.org John :-#)# Andrew Welburn wrote:
IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :)
I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress...
Andrew Welburn (mobile) www.andys-arcade.com
On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote:
Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed!
The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time.
Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2.
I've also renamed the files and added the Fluke part numbers when they existed on the files.
Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT.
I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know.
Also some TEAC notes on emulating a 720 drive.
All now found in the TTL /Fluke/PDFs/9100_fixture directory.
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Hey guys, I'm new here, did a long intro mail but it never arrived so I do a very short one now. Just wanted to report that I bought a Fluke 9100A last weekend. It has V6.1 running. The system came with the programmer keyboard and has a video card. It has 4 MB Ram and the ROMS are V5. There is a 340 MB SCSI Seagate Harddrive in it. It works 100% It came with a lot of extra stuff, I'll report more later. Verstuurd vanaf mijn iPad Op 4 nov. 2012 om 23:07 heeft John Robertson <jrr@flippers.com> het volgende geschreven:
Along with the Fluke/PDFs/9100_fixture documents I have a copy of the instructions (PN885231 rv2) for the 9100A 40 mb Hard Disk Upgrade kit PN878801 (for Ver 6.0) - this document is still useful in that it talks to ROMs on the 9100A and versions required...it might be that Ver 6.0 requires a ROM upgrade as well.
FTP site is: ftp://ttl.arcadetech.org
John :-#)#
Andrew Welburn wrote:
IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :)
I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress...
Andrew Welburn (mobile) www.andys-arcade.com
On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote:
Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed!
The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time.
Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2.
I've also renamed the files and added the Fluke part numbers when they existed on the files.
Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT.
I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know.
Also some TEAC notes on emulating a 720 drive.
All now found in the TTL /Fluke/PDFs/9100_fixture directory.
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I couldn't respond to this when I saw it the other day as my email wasn’t working - but I thought you were both using the copy of 6.1 on a 9100A that I sent over? Did that not work? Martin. Sent from Windows Mail From: Andrew Welburn Sent: 04 November 2012 09:31 To: jrr@flippers.com; Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :) I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress... Andrew Welburn (mobile) www.andys-arcade.com On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote:
Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed!
The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time.
Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2.
I've also renamed the files and added the Fluke part numbers when they existed on the files.
Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT.
I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know.
Also some TEAC notes on emulating a 720 drive.
All now found in the TTL /Fluke/PDFs/9100_fixture directory.
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
martin@guddler.co.uk wrote:
I couldn't respond to this when I saw it the other day as my email wasn’t working - but I thought you were both using the copy of 6.1 on a 9100A that I sent over? Did that not work?
Martin.
Hi Martin, Its been so long since I last looked at a 9100A that I just don't recall that. The copy of 6.1 that I have on TTL (Fluke/9100A/System_DiscsRV6.1) are in a zip dated Jan 22, 2003 - is that your set? Is the set unlocked - in other words can it be installed in any machine (not serialized)? What I would like to do is replace the SCSI drive with a SSD of some sort. Then I would be inclined to actually USE the 9100 - currently I haven't because I don't trust the drive to work for more than a few weeks/months before grinding to a halt and taking all the software with it... Now I know that Andrew has done work on converting the 9100A to PCMCIA, etc. http://www.andys-arcade.com/personal/tech/fluke9100/index.htm (task #9) so, it has been done (a few years ago)...just need to take a bit of time I guess and look into it more. What I will be doing over the next little while it tidying up the TTL Fluke directory to make it easier to find information and have it more logically (well...my idea of logically) organized. Hope it helps folks! John :-#)#
Sent from Windows Mail
From: Andrew Welburn Sent: 04 November 2012 09:31 To: jrr@flippers.com; Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :)
I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress...
Andrew Welburn (mobile) www.andys-arcade.com
On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote:
Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed!
The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time.
Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2.
I've also renamed the files and added the Fluke part numbers when they existed on the files.
Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT.
I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know.
Also some TEAC notes on emulating a 720 drive.
All now found in the TTL /Fluke/PDFs/9100_fixture directory.
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Ah, ok, you obviously haven't done that yet 😊 I emailed it over in about 2008 after doing the SSD conversion. It was an image of my SSD. Andy did the same conversion at some point after that and kindly documented it - I didn't think to as I merrily got on with making the keyboard adapter. Andy was using the same image for his SSD. I’ve never made it publicly available for that exact reason, don't know if its processor locked or not. I assumed it wasn’t as I thought you were both using it on your 9100A’s.... Hence now wondering if it was processor locked and it didn't work? Or FT only and it didn't work? From: John Robertson Sent: 06 November 2012 17:56 To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory martin@guddler.co.uk wrote:
I couldn't respond to this when I saw it the other day as my email wasn’t working - but I thought you were both using the copy of 6.1 on a 9100A that I sent over? Did that not work?
Martin.
Hi Martin, Its been so long since I last looked at a 9100A that I just don't recall that. The copy of 6.1 that I have on TTL (Fluke/9100A/System_DiscsRV6.1) are in a zip dated Jan 22, 2003 - is that your set? Is the set unlocked - in other words can it be installed in any machine (not serialized)? What I would like to do is replace the SCSI drive with a SSD of some sort. Then I would be inclined to actually USE the 9100 - currently I haven't because I don't trust the drive to work for more than a few weeks/months before grinding to a halt and taking all the software with it... Now I know that Andrew has done work on converting the 9100A to PCMCIA, etc. http://www.andys-arcade.com/personal/tech/fluke9100/index.htm (task #9) so, it has been done (a few years ago)...just need to take a bit of time I guess and look into it more. What I will be doing over the next little while it tidying up the TTL Fluke directory to make it easier to find information and have it more logically (well...my idea of logically) organized. Hope it helps folks! John :-#)#
Sent from Windows Mail
From: Andrew Welburn Sent: 04 November 2012 09:31 To: jrr@flippers.com; Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :)
I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress...
Andrew Welburn (mobile) www.andys-arcade.com
On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote:
Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed!
The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time.
Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2.
I've also renamed the files and added the Fluke part numbers when they existed on the files.
Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT.
I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know.
Also some TEAC notes on emulating a 720 drive.
All now found in the TTL /Fluke/PDFs/9100_fixture directory.
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
To be honest i remember this vaguley, but because my system was built on 6.0 it would mean pulling every file off individually that i've created and i just didn't get round to doing it... so, its ringing bells, but i'm not running 6.1 but now you mention it, yeh i guess 6.1 does work on a 9100A if you use Martins image.. i know the disks on flippers did not work for me no matter how much i tried.. :) Andrew Welburn http://www.andys-arcade.com On 06/11/2012 18:02, martin@guddler.co.uk wrote:
Ah, ok, you obviously haven't done that yet 😊
I emailed it over in about 2008 after doing the SSD conversion. It was an image of my SSD. Andy did the same conversion at some point after that and kindly documented it - I didn't think to as I merrily got on with making the keyboard adapter.
Andy was using the same image for his SSD.
I’ve never made it publicly available for that exact reason, don't know if its processor locked or not. I assumed it wasn’t as I thought you were both using it on your 9100A’s....
Hence now wondering if it was processor locked and it didn't work? Or FT only and it didn't work?
From: John Robertson Sent: 06 November 2012 17:56 To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
martin@guddler.co.uk wrote:
I couldn't respond to this when I saw it the other day as my email wasn’t working - but I thought you were both using the copy of 6.1 on a 9100A that I sent over? Did that not work?
Martin.
Hi Martin,
Its been so long since I last looked at a 9100A that I just don't recall that. The copy of 6.1 that I have on TTL (Fluke/9100A/System_DiscsRV6.1) are in a zip dated Jan 22, 2003 - is that your set? Is the set unlocked - in other words can it be installed in any machine (not serialized)?
What I would like to do is replace the SCSI drive with a SSD of some sort. Then I would be inclined to actually USE the 9100 - currently I haven't because I don't trust the drive to work for more than a few weeks/months before grinding to a halt and taking all the software with it...
Now I know that Andrew has done work on converting the 9100A to PCMCIA, etc.
http://www.andys-arcade.com/personal/tech/fluke9100/index.htm (task #9)
so, it has been done (a few years ago)...just need to take a bit of time I guess and look into it more.
What I will be doing over the next little while it tidying up the TTL Fluke directory to make it easier to find information and have it more logically (well...my idea of logically) organized. Hope it helps folks!
John :-#)#
Sent from Windows Mail
From: Andrew Welburn Sent: 04 November 2012 09:31 To: jrr@flippers.com; Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :)
I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress...
Andrew Welburn (mobile) www.andys-arcade.com
On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote:
Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed!
The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time.
Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2.
I've also renamed the files and added the Fluke part numbers when they existed on the files.
Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT.
I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know.
Also some TEAC notes on emulating a 720 drive.
All now found in the TTL /Fluke/PDFs/9100_fixture directory.
John :-#)#
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not! Confused yet?? LOL! Sent from my 'Surface RT' From: Andrew Welburn Sent: 06 November 2012 18:12 To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory To be honest i remember this vaguley, but because my system was built on 6.0 it would mean pulling every file off individually that i've created and i just didn't get round to doing it... so, its ringing bells, but i'm not running 6.1 but now you mention it, yeh i guess 6.1 does work on a 9100A if you use Martins image.. i know the disks on flippers did not work for me no matter how much i tried.. :) Andrew Welburn http://www.andys-arcade.com On 06/11/2012 18:02, martin@guddler.co.uk wrote: > Ah, ok, you obviously haven't done that yet 😊 > > > > I emailed it over in about 2008 after doing the SSD conversion. It was an image of my SSD. Andy did the same conversion at some point after that and kindly documented it - I didn't think to as I merrily got on with making the keyboard adapter. > > > > Andy was using the same image for his SSD. > > > > I’ve never made it publicly available for that exact reason, don't know if its processor locked or not. I assumed it wasn’t as I thought you were both using it on your 9100A’s.... > > > > Hence now wondering if it was processor locked and it didn't work? Or FT only and it didn't work? > > > > > From: John Robertson > Sent: 06 November 2012 17:56 > To: Technical Tools Mail List > Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory > > > martin@guddler.co.uk wrote: >> I couldn't respond to this when I saw it the other day as my email wasn’t working - but I thought you were both using the copy of 6.1 on a 9100A that I sent over? Did that not work? >> >> >> >> Martin. >> >> >> > Hi Martin, > > Its been so long since I last looked at a 9100A that I just don't recall > that. The copy of 6.1 that I have on TTL (Fluke/9100A/System_DiscsRV6.1) > are in a zip dated Jan 22, 2003 - is that your set? Is the set unlocked > - in other words can it be installed in any machine (not serialized)? > > What I would like to do is replace the SCSI drive with a SSD of some > sort. Then I would be inclined to actually USE the 9100 - currently I > haven't because I don't trust the drive to work for more than a few > weeks/months before grinding to a halt and taking all the software with > it... > > Now I know that Andrew has done work on converting the 9100A to PCMCIA, etc. > > http://www.andys-arcade.com/personal/tech/fluke9100/index.htm (task #9) > > so, it has been done (a few years ago)...just need to take a bit of time > I guess and look into it more. > > What I will be doing over the next little while it tidying up the TTL > Fluke directory to make it easier to find information and have it more > logically (well...my idea of logically) organized. Hope it helps folks! > > John :-#)# > >> Sent from Windows Mail >> >> >> From: Andrew Welburn >> Sent: 04 November 2012 09:31 >> To: jrr@flippers.com; Technical Tools Mail List >> Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory >> >> >> IIRR 6.1 won't load on a 9100a, I thought it was because of bad disk image, but it makes sense now you say it. I'll have to read the documents a bit later, bug fixes! No way :) that's part of the fun of using TL/1 :) >> >> I'll be working on several 9100's soon and I'll be making an update to my 9100 page with progress... >> >> Andrew Welburn (mobile) >> www.andys-arcade.com >> >> On 4 Nov 2012, at 07:48, John Robertson <jrr@flippers.com> wrote: >> >> >>> Just found today (Saturday, Nov 3, 2012) a few updated sets of training manuals for both the 9100A and 9110FT - which appear to be factory proof sets - printed single side (originals) with Post-it notes saying "MASTER" and internal Fluke documents talking about making production copies...see the first page on a couple of the 1994 files. These came with a recent 9100 purchase that I had set aside without looking over fully. Must power up the 9100 base and see what software is installed! >>> >>> The latest documents were from 11/1994, there is also a 10/1993 set too. I think the difference depends on the version of software or just improvements to the documents over time. >>> >>> Note that the 1994 FT manuals specify that Rev. 6.1 software is loaded on the machine. Note also that the Fluke copy sheet notes at the front of the 1994 FT Vol 2 manual say "DO NOT USE Equipmt (sic) never updated to match manual - use old text". So, raises the question about if the last revision I've loaded is able to be used or if the FT series never implemented all the features (new?) covered in the 1994 Part 2. >>> >>> I've also renamed the files and added the Fluke part numbers when they existed on the files. >>> >>> Interestingly, one file was misnamed - it actually is the installation instructions for Ver 6.0 software - It turns out there were four versions of 6.0 software update packs, depending on if you have 3.0 or higher, or 5.0 and if your machine has the programmer option or not. Interesting notes on bugs cured and remaining for those who are writing programs for the 9100A/FT. >>> >>> I suspect 6.1 was the last version and may have only been intended for the FT series - if anyone has a 9100A running 6.1 please let us know. >>> >>> Also some TEAC notes on emulating a 720 drive. >>> >>> All now found in the TTL /Fluke/PDFs/9100_fixture directory. >>> >>> John :-#)# >>> >>> -- >>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) >>> www.flippers.com "Old pinballers never die, they just flip out" >>> >>> _______________________________________________ >>> Techtoolslist mailing list >>> Techtoolslist@flippers.com >>> http://seven.pairlist.net/mailman/listinfo/techtoolslist >>> FTP site is: ftp://ttl.arcadetech.org >>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ >>> >> _______________________________________________ >> Techtoolslist mailing list >> Techtoolslist@flippers.com >> http://seven.pairlist.net/mailman/listinfo/techtoolslist >> FTP site is: ftp://ttl.arcadetech.org >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ >> _______________________________________________ >> Techtoolslist mailing list >> Techtoolslist@flippers.com >> http://seven.pairlist.net/mailman/listinfo/techtoolslist >> FTP site is: ftp://ttl.arcadetech.org >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > > _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/</jrr@flippers.com> _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
oh godamnit. yes there is that. Andrew Welburn http://www.andys-arcade.com On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Helloooooooooooopoooooo, I have got a Fluke 9100 A running 6.1 right here on my table !! I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John. Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Here is the picture : http://www.flickr.com/photos/78196621@N08/8161905480 Verstuurd vanaf mijn iPad Op 6 nov. 2012 om 20:13 heeft Andre Huijts <a.huijts@upcmail.nl> het volgende geschreven:
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Wondered what that blank mail was 😊 Sent from my 'Surface RT' From: Andre Huijts Sent: 06 November 2012 19:13 To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory Helloooooooooooopoooooo, I have got a Fluke 9100 A running 6.1 right here on my table !! I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John. Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Woo Hoo! Surface! -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of martin@guddler.co.uk Sent: Tuesday, November 06, 2012 11:28 AM To: Technical Tools Mail List Subject: [Techtoolslist] RE: Updates to Fluke 9100 pdfs directory Wondered what that blank mail was 😊 Sent from my 'Surface RT' From: Andre Huijts Sent: 06 November 2012 19:13 To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory Helloooooooooooopoooooo, I have got a Fluke 9100 A running 6.1 right here on my table !! I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John. Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Surface ? Ah, let's hope you don't have the 32GB version which has only 16 GB available.... I thought it was pretty funny that 5GB is taken just for the Windows recovery tools :P Oh well.... Here is another try to send the picture of my 9100A running 6.1: http://www.flickr.com/photos/level_42/8161905480/ Op 6 nov. 2012, om 20:28 heeft martin@guddler.co.uk het volgende geschreven:
Wondered what that blank mail was 😊
Sent from my 'Surface RT'
From: Andre Huijts Sent: 06 November 2012 19:13 To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
André Huijts andre.huijts@upcmail.nl _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Says the guy taking pictures with an iPad 2 while driving... :) -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Andre Huijts Sent: Tuesday, November 06, 2012 11:48 AM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory Surface ? Ah, let's hope you don't have the 32GB version which has only 16 GB available.... I thought it was pretty funny that 5GB is taken just for the Windows recovery tools :P Oh well.... Here is another try to send the picture of my 9100A running 6.1: http://www.flickr.com/photos/level_42/8161905480/ Op 6 nov. 2012, om 20:28 heeft martin@guddler.co.uk het volgende geschreven:
Wondered what that blank mail was 😊
Sent from my 'Surface RT'
From: Andre Huijts Sent: 06 November 2012 19:13 To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
André Huijts andre.huijts@upcmail.nl _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Andre Huijts wrote:
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
I too appear to have a 9100A with 6.1 happily running on it. This was a new machine I picked up afew months ago and had never gotten around to powering it up... ROM 2.2, other software is all 6.1 - has the video (programming) option. Shall try yanking the drive in a few days and seeing if it works in another machine - if it does then it would appear that 6.1 is not serialized. John :-#)#
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
That would be the one I sold you? If you get copies of the disks, let me know... A friend needs them. -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Tuesday, November 06, 2012 2:42 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory Andre Huijts wrote:
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
I too appear to have a 9100A with 6.1 happily running on it. This was a new machine I picked up afew months ago and had never gotten around to powering it up... ROM 2.2, other software is all 6.1 - has the video (programming) option. Shall try yanking the drive in a few days and seeing if it works in another machine - if it does then it would appear that 6.1 is not serialized. John :-#)#
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
The floppies I have here don't show any printed serial nrs. on them. I have two sets of the original Fluke disks so I don't think it is likely they are serialized...companies who would own more 9100's would definitly want to know which floppy set would belong to which machine if they were serialized...so you would expect the machine's serial nr. to be printed on the floppy labels. But I agree it's not a 100% definite indication... Op 6 nov. 2012, om 23:51 heeft Barry Shilmover <barry@shilmover.com> het volgende geschreven:
That would be the one I sold you?
If you get copies of the disks, let me know... A friend needs them.
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Tuesday, November 06, 2012 2:42 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
Andre Huijts wrote:
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
I too appear to have a 9100A with 6.1 happily running on it. This was a new machine I picked up afew months ago and had never gotten around to powering it up...
ROM 2.2, other software is all 6.1 - has the video (programming) option.
Shall try yanking the drive in a few days and seeing if it works in another machine - if it does then it would appear that 6.1 is not serialized.
John :-#)#
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
André Huijts andre.huijts@upcmail.nl _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Well... I have installed 4.0 and 6.0 on my machine before, I've never run into serial number problems... Andrew Welburn (mobile) www.andys-arcade.com On 6 Nov 2012, at 23:00, Andre Huijts <a.huijts@upcmail.nl> wrote:
The floppies I have here don't show any printed serial nrs. on them. I have two sets of the original Fluke disks so I don't think it is likely they are serialized...companies who would own more 9100's would definitly want to know which floppy set would belong to which machine if they were serialized...so you would expect the machine's serial nr. to be printed on the floppy labels.
But I agree it's not a 100% definite indication...
Op 6 nov. 2012, om 23:51 heeft Barry Shilmover <barry@shilmover.com> het volgende geschreven:
That would be the one I sold you?
If you get copies of the disks, let me know... A friend needs them.
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Tuesday, November 06, 2012 2:42 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
Andre Huijts wrote:
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
I too appear to have a 9100A with 6.1 happily running on it. This was a new machine I picked up afew months ago and had never gotten around to powering it up...
ROM 2.2, other software is all 6.1 - has the video (programming) option.
Shall try yanking the drive in a few days and seeing if it works in another machine - if it does then it would appear that 6.1 is not serialized.
John :-#)#
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out"
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
André Huijts andre.huijts@upcmail.nl
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Barry Shilmover wrote:
That would be the one I sold you?
If you get copies of the disks, let me know... A friend needs them.
Yup, sitting since late 2011. Somehow you had Fluke original proofs of the 9100 training books that I have just scanned and uploaded... Have to dig more in the boxes (need to find them - they have drifted away from the box holding the 9100A), perhaps there are floppies? I have WAY too much stuff (if that is possible?)! John :-#)#
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Tuesday, November 06, 2012 2:42 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
Andre Huijts wrote:
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
I too appear to have a 9100A with 6.1 happily running on it. This was a new machine I picked up afew months ago and had never gotten around to powering it up...
ROM 2.2, other software is all 6.1 - has the video (programming) option.
Shall try yanking the drive in a few days and seeing if it works in another machine - if it does then it would appear that 6.1 is not serialized.
John :-#)#
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I found some more Fluke stuff... Need to find it. I got that from a friend that worked at Fluke, so that's probably why. B -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Tuesday, November 06, 2012 3:36 PM To: techtoolslist@flippers.com Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory Barry Shilmover wrote:
That would be the one I sold you?
If you get copies of the disks, let me know... A friend needs them.
Yup, sitting since late 2011. Somehow you had Fluke original proofs of the 9100 training books that I have just scanned and uploaded... Have to dig more in the boxes (need to find them - they have drifted away from the box holding the 9100A), perhaps there are floppies? I have WAY too much stuff (if that is possible?)! John :-#)#
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Tuesday, November 06, 2012 2:42 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Updates to Fluke 9100 pdfs directory
Andre Huijts wrote:
Helloooooooooooopoooooo,
I have got a Fluke 9100 A running 6.1 right here on my table !!
I actually mailed a picture of it but I guess pics are not allowed here. I have got TWO sets of original 6.1 floppies so I am hoping to make images of these and send them to John.
I too appear to have a 9100A with 6.1 happily running on it. This was a new machine I picked up afew months ago and had never gotten around to powering it up...
ROM 2.2, other software is all 6.1 - has the video (programming) option.
Shall try yanking the drive in a few days and seeing if it works in another machine - if it does then it would appear that 6.1 is not serialized.
John :-#)#
Op 6 nov. 2012 om 19:28 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:
oh godamnit.
yes there is that.
Andrew Welburn http://www.andys-arcade.com
On 06/11/2012 18:27, martin@guddler.co.uk wrote:
I’m using an FT so if neither of you are using the image I sent over then we still don't know if 6.1 work's on a ‘A’ or not!
Confused yet?? LOL!
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
participants (6)
-
Andre Huijts -
Andrew Welburn -
Barry Shilmover -
Jack Rubin -
John Robertson -
martin＠guddler.co.uk