Cool, I have a dead 9100A.. but it also doesn't have a display :D interesting the full 68000 bus is on that connector. William Stillwell Board Member - Inspiration labs, Inc. a 501c3 organization - Tampa's Premier Maker Space. Board Member & Co-Founder - Byte Amusement Group // Free Play Florida Arcade & Pinball Show a 501c3 organization Member of MakerFX - a 501c3 organization - Orlando's Premier Maker Space Volunteer for The Phoenix - a 501c3 Organization - Providing outreach and events for those who are living a sober lifestyle. Former Board Member - West Central Florida Group - a 501c3 Organization. - Providing Emergency Communications across Central Florida. On Tue, May 31, 2022 at 8:22 PM Tony Jones <tony@tonyjones.com> wrote:

$100 + postage, or trades.

If I'm interpreting this (https://www.ebay.com/itm/185133456934) correctly someone paid $250 for one which - to me - seems certifiable.

The card plugs into an expansion slot on the 9100A and you debug the broken 9100A using a 9000a-68000 pod + working 9100 (or I guess 9010).

N.B the 9100FT uses a different method (there is a 9132A/Jane sync pod connector on the FT motherboard) and you use a 9132 with a 68030 personality module to debug.

Thanks! _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/