On 1 Nov 2012, at 2:29 PM, John Robertson wrote:
adolfo bustos wrote:
Subject: Prom Burner B&C Microsystems, Model 1409C Hi! CRC [John Robertson ] I got this, so far;
''Failed to register 3100Hdlr.ocx Please reinstall the application.-''
how can I, bypass registration Sincerely, Thanks.- Adolfo
Hi Adolfo,
Sorry, I do not know how to bypass registration - perhaps you need to contact B&C to ask them if they recall how that is done...
http://www.bpmicro.com (now called BPMicro)
They have something on their web site about the "3100Hdlr.ocx" if you punch that into a search engine. Seems to be looking for the Hardware serial number.
Something about it being an ActiveX component in further searching on http://www.isthisfilesafe.com/
John :-#)#
Sorry about the slow reply, but the swamp runneth over... Having installed the software several years back, I went back and looked at the software and my correspondence with BP Micro. Also went back and looked at the site. Ultimately, you have to get a key from BP Micro to run the software. I would take the following steps: - Go to <http://www.bpmicro.com/web/bphome.nsf/webpages/Downloads.htm> and register under the "Login to download the latest BPWin release". BPM will send you a password. - Log in and in the table of software releases you will find a link to legacy software. - Download the software that will support your unit. - Follow the registration procedure for your unit outlined on the link above. They will send you a key to include with the applicable code. I note that I had included the key to my 1200 in the code, but that is evidently specific to my programmer. I found the folks at BP Micro extremely helpful.... Hope this helps. ->CRC _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/