In the interest of saving someone else a little time, if you need to change the line-voltage on the Fluke 9020A micro-tester then refer to the following pictures: http://imgur.com/a/Im6bF#0 In the final picture are two slide switches in the lower middle, on the PCB there is an indication of the voltage options and you can adjust the switches, for 240V I swapped them from how they appear in the picture (which was how they were set for 110V). Safety-first, don't try this at home without supervision etc unless you know what you're doing. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/