Sorry, that should not have made it to the list Art ----- Original Message ----- From: "Art Mallet - Artfromny" <artfromny@nycap.rr.com> To: <ayeckley@sierralobo.com>; "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Wednesday, January 10, 2007 11:05 PM Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software install
UPS on the 2 boxes was 44.72
I had NO idea these things were so damn complicated - I will stick to the 9010 for my own use :) Remember I have one more main unit, complete, for sale - I also sold one that I may have to take back (bad HDD) - if you have any interest in them Art
----- Original Message ----- From: "Alex Yeckley" <ayeckley@sierralobo.com> To: "'Technical Tools Mail List'" <techtoolslist@flippers.com> Sent: Wednesday, January 10, 2007 10:56 PM Subject: Re: [Techtoolslist] Fluke 9100 pod recognition after software install
sure enough, i formatted the drive
Anyone familiar with the "controller returned error f6h" message? I'm getting that consistently when I try to format my Miniscribe, regardless of which interleave option I select (0-6). I've swapped out the MFM/SCSI adapter as well as the interface board. IIRC, I'm even getting that message using different drives. Running ROM rev 5, and using Service Disk image 1.4 that Andy provided earlier today.
Alex ---- ayeckley@elektronforge.com www.elektronforge.com
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist