">2GB"? This machine is 20 megs...supposedly won't handle a larger drive (like 40 megs) without drivers or firmware revision...drivers are all I hope it needs. I don't have a 68000 OS-9 system to experiment with. John :-#)# At 11:56 AM 20/09/2002 -0700, Paul Swan wrote:
John,
I presume that if you plug in a new SCSI disk onto the 9100 there is a problem?
The 5380 driver for OS-9 comes bundled with OS-9. The release at the time may not have been able to handle drives >2Gb though. As a first step, I'd suggest trying an older SCSI hard disk <2Gb in size and see if that works.
Worst case it may be that the Fluke software itself is tied specifically to this drive configuration.
Is the drive readable on standard 68K OS-9 System? Has anyone tried that?
Regards,
Paul.
John Robertson wrote:
Hi Paul,
The problem is we want to update the 9100 so it can handle larger (newer) SCSI drives. Have you any suggestions for writing NCR5380 SCSI drivers for OS-9? We really don't want to try and save the old WD1002 card or it's MFM drives - the drives are way too old to be reliable...
John :-#)#