"just hold down SOFTKEY-F2-F4 " Just to remind those trying this, you must first upgrade the ROMs on the PCB before that command works. I tried it with version 2 ROMs and it wouldn't recognize that series of keystrokes. ------------------------------ Message: 5 Date: Thu, 28 Dec 2006 11:21:05 -0500 From: Corey Stup <Corey@Stup.net> Subject: Re: [Techtoolslist] booting 9100 from floppies To: Technical Tools Mail List <techtoolslist@flippers.com> Message-ID: <4593EEF1.1080604@Stup.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
of course, i havn't got even to that stage yet because i can't get my 9100 to boot from floppy, i had assumed putting the disk in and switching on it should find the disk and try to run off that, but no luck for me trying that...
any thoughts?
Make a set ofthe 6.0 images. The 6.1's can't be trusted. I have a set of 6.1 data, and honestly its minimally different from 6.0. Somewhere I have notes that show which binaries/libraries have any differences at all. Anyway, to boot from floppy, just hold down SOFTKEY-F2-F4 while booting. It will skip the HD and attempt to load from floppy. ------------------------------ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist