Fide doesn't work on 64 bit because the underlying tools are 16 bit. -----Original Message----- From: "Theron Troxel" <troxelone@yahoo.com> Sent: 4/1/2013 8:27 PM To: "Technical Tools Mail List" <techtoolslist@flippers.com> Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE Had a chance to look at this a little bit more tonight. I am using Windows 7 x64, and doesn't appear to be working. I can't even get the script to compile. I switched to a little netbook that I have and now the script is compiling and not giving any errors, but won't transfer the data to the fluke. The fluke just displays that it's receiving , but never changes. My netbook is recognizing the cable and matched the settings on both the computer and fluke to match. Any ideas would be greatly appreciated. ________________________________ From: Theron Troxel <troxelone@yahoo.com> To: Technical Tools Mail List <techtoolslist@flippers.com> Sent: Monday, April 1, 2013 6:12 PM Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE The cord was initially com7, but changed it thinking it had to be com1 - com4 to match the FIDE setting. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/