[Ranger Mike] I use 3.10, with code 10, and have not had one bit of trouble. Of course, being a computer old timer, I still think 9600 baud is pretty quick, and am happy to use it (the baud rate which I am happy using a VT320 connected to a vms box).
This is probably the cause of my problems. It's been years since I used the older (pre-version 6) Promlink and don't have access to it anymore. Did someone have it available on thier website? The problem with the RAW BINARY code 16 is that my 29B will not recognize it. The firmware in mine is version 6, the EPROMs are numbered 315-14-49 thru 315-14-55. I haven't tried Alex's version 5 EPROMs yet. I'm hoping that it doesn't require a PAL change to swap versions, DATA I/O use to be famous for this.
[Ranger Mike] I tried using the 6.10 version, and get the hanging problem as well. With 3.10, I use net rom binaries, and have no problems at all.
Mike, what the version number of your firmware in the 29B? Dave To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request@flippers.com. Please direct other questions, comments, or problems to jrr@flippers.com.