On Wed, May 4, 2016 at 5:27 PM, Tony Jones <tony@tonyjones.com> wrote:
Also, specific to the 9100[FT] does anyone know how to obtain the 68000 pod software version. It's not specified in version 1 of the manual, it's "4.36 Software Revision Level - Address F000 0012" in version 2 of the manual. I get "invalid address" when attempting to read/write any of these pod special addresses (outside normal address range).
adding a bit more info, I saw on the ukvac thread a comment about needing to write BF to F000 0028 (clearing bit 6, self-test) , which is "4-46 Error Summary Mask" in v2 of the manual (4-42 in v1). I noticed it is also possible to disable reporting of illegal address errors by clearing bit 5. So I was looking for a pod-specific setup in the 9100 Supplemental Pod Information manual that allowed access to the error summary mask (since trying to directly write to it generates an illegal address error, chicken&egg). I can't however, see one, there is "ERR_MASK CTRL_DR nnnn" and "ERR_MASK FORCING nnnn" which correspond to F000 002A (4-47 or 4-43) and F000 002C (4-48 or 4-44). _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/