On 05/17/2016 12:29 PM, Tony Jones wrote:
Hi Art.
If you cannot find one, you can always roll your own (albeit unshielded) using some ribbon cable and one of these: http://www.jameco.com/Jameco/Products/ProdDS/104097.pdf
best
Tony
I'm not so sure - there is something going on in the 40-pin DIP header on those cables as they have different numbers depending on the POD. I suspect grounds are what is varied, but never tested that supposition... http://flippers.com/fluke.html Note the different part numbers for the UUT cables at the bottom of the page... John :-#(#
On Tue, May 17, 2016 at 12:19 PM, Art <art@artfromny.com> wrote:
Looking to buy a decent UUT cable.
Thanks
Art
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/