What about the binary programs though? Look at programs 12 - 18 http://rossiters.com/games/fluke-async.txt Matt -----Original Message----- From: owner-techtoolslist@www.flippers.com [mailto:owner-techtoolslist@www.flippers.com]On Behalf Of John Robertson Sent: Wednesday, October 08, 2003 3:52 PM To: techtoolslist@www.flippers.com; techtoolslist@www.flippers.com Subject: Re: [techtoolslist] Uploading binary images from Fluke 9010a James is correct, you can transfer the programs that are loaded with a tape out the RS-232 port and store on a PC. The software is on the TTL ftp site ftp.flippers.com/TTL/Fluke . RKSIC.exe is one of them John :-#)# At 04:45 PM 08/10/2003 -0400, James Bright wrote:
For the program itself? I have not used the tape option myself, but I thought it was basically: (1) load the program(s) from tape, (2) transfer the programs loaded via RS-232 to computer. (I.e. RKSIC or FIDE).
Or is there other binary data that is on the tape?
JB
--James Bright www.QuarterArcade.com Restored Arcade Games for your Home
----- Original Message ----- From: "Matthew Rossiter" <matt@veriosc.com> To: <techtoolslist@www.flippers.com> Sent: Wednesday, October 08, 2003 4:34 PM Subject: [techtoolslist] Uploading binary images from Fluke 9010a
Did anyone ever figure out how to transfer binary images such as those on tape for the clock module? I happen to have the tape with the binaries, the clock module and the Async. Sig. Option installed on my fluke 9010a. It would be nice to keep an archive in case my tape goes bad or something. I'll have to do a little research on that.
Matt