Has anyone tried programming the Intersil IM5610 with programmer set to Harris HM7603 ? -----Original Message-----
From: Martin White <martin@guddler.co.uk> Sent: Jun 1, 2011 8:22 PM To: Technical Tools Mail List <techtoolslist@flippers.com> Subject: [Techtoolslist] Intersil 5610 (32x8 prom)
Hi all,
I think this has come up before, so I guess the answer is no but I figured I'd try again anyway.
Does anyone have the programming info for the Intersil 5610 please? By that, I mean the actual documentation, rather than the device ID for the Data I/O 29B (which I have found courtesy of John).
My programmer, the Dataman 48 Pro+ supports the 82S123 by Philips / Signetics but not the Intersil 5610. Dataman are pretty good and will add support for a "new" device provided you send in samples and info. I've been in touch and explained that I can't really spare the samples as I only have 6 left (and they're OTP) so they've kindly said they'll at least have a nose for me if I can send in the info.
So far I've just mailed in the datasheet for the 82S123 and the 5610 but I suspect that wont be anything like enough. I suspect they'll need the programming reference too.
Thanks, Martin. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/