I have just checked the FTP site and see that both the Operators and Maintenace manuals are already there. I emailed a copy of mine to Yeap and also commented on the common fault caused by conning a Huntron 1005B-1S to a powered circuit.... Symptom:- angled trace that cannot be levelled when on LOW range. R6 (10 Ohms 0.5W) gets fried. replacement usually fixes the problem. Best Wishes Fraser ----- Original Message ----- From: "John Robertson" <jrr@flippers.com> To: "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Monday, October 13, 2008 6:24 PM Subject: Re: [Techtoolslist] Huntron tacker HTR1005B-1S
Fraser Castle wrote:
Yeap
Send me your email address and I'll email it to you.
Fraser Fraser, send it to the TTL inbox and I shall put it up for all to share...
John :-#)#
----- Original Message ----- From: "yeap wui kean" <yeap.wuikean@gmail.com> To: <Techtoolslist@flippers.com> Sent: Monday, October 13, 2008 8:21 AM Subject: [Techtoolslist] Huntron tacker HTR1005B-1S
Hi, Is anyone have the calibration manual for Huntron Tracker HTR1005B-1S.I need the manual to recalibrate the Trace line.Thanks in advance.
Best regards Yeap W K _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.173 / Virus Database: 270.8.0/1722 - Release Date: 13/10/2008 07:50