Okay, been hard at work on a few things, time to share another bit. Following up on the post about writing disks, here’s how you put something interesting on them to write. Instructions are "works for me on Linux" level. 1. Get a copy of ToolShed[1]. This is an open-source project for dealing with OS-9 disks. Build it and put it somewhere you can call it. 2. Make an empty disk image. High density: os9 format -q -e -k -bs256 -9 -st32 -dd -t80 -ds disk.img Double density: os9 format -q -e -k -bs256 -9 -st16 -dd -t80 -ds disk.img 3. Make the userdisk structure in your disk image: touch MEVALID os9 makdir 'disk.img,/SYSDISK' os9 makdir 'disk.img,/PARTLIB$PARTLIB' os9 makdir 'disk.img,/PODLIB$PODLIB' os9 makdir 'disk.img,/HELPLIB$HELPLIB' os9 makdir 'disk.img,/PROGLIB$PROGLIB' os9 copy MEVALID disk.img,/ 3. Convert your TL/1 code. This doesn’t compile it, but is equivalent to the editor COPY from TEXT to PROGRAM type. I wrote a Python program to do this: pcv.py infile.tl1 prog_outfile Since it’s called from the shell, you can convert as many as you want in one go, instead of plonking away at the 9100 keyboard for each file. 5. Copy the program into the disk image: os9 copy prog_outfile 'disk.img,/PROGLIB$PROGLIB/PROGRAM$OUTFILE' This just puts it into the PROGLIB, but you can put it in a UUT as well: os9 makdir 'disk.img,/UUT$WHATEVER' os9 copy prog_outfile 'disk.img,/UUT$WHATEVER/PROGRAM$OUTFILE' 6. Write the image to a disk and load it onto your 9100. I put up some helpful TL/1 code at https://github.com/ieure/fluke-9100-lib which you can - getromcrc. Works exactly like getromsig, but returns a CRC-32. This is debugged and produces the exact CRC listed in the MAME source code, so nearly any ROM signature you could ever want is readily available. - testromcrc. Works exactly like testromfull, but takes a CRC-32 instead of Fluke’s signature. It also works from the front panel, so you don’t need video or keyboard to use it. - u_testroms. Reads a text file of ROM addresses, refs, and CRCs, and tests them all. I prefer this to duplicating a bunch of testromcrc calls. - u_testrams. Same deal as u_testroms, but for RAM. This isn’t a full replacement for the video and keyboard, but you can get plenty more out of a 9100 this way no matter what the configuration. The main issue is that it’s fairly difficult to get TL/1 code right without using the debugger. Running TLC.EXE over them helps, but many issues only crop up once you actually run it. -- Ian [1]: https://sourceforge.net/projects/toolshed/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/