hi all. Well I spent most of yesterday and this morning finding a way to make floppy disk images using Teledisk, boy was that a painful process..... (3 versions of teledisk later, and using a 486dx4-75 laptop to get it working..) so now i have some disks made up, i want to get my 9100 to boot them.. but can i heck. Late last night i'm sure i saw a pdf that had a software install procedure, but i can't for the life of me find it now, i have looked on flippers again for it, but can't find it, forest for the trees... can anyone let us know how to make the 9100 boot from floppy, or remind me of the pdf file that i saw so i can just get on with it myself? this is driving me crackers... ultimately i am going to try to upgrade my system software from 4.1 to 6.0 (i searched TTL and found that the 6.1 disk images are bad - john can you mark these as bad in the ftp? i wasted quite a bit of time before finding this out heh) and also upgrade the feeble 2mb ram to 4mb or whatever i can get to work... i also need to get the videocard that i have installed to work too.... but first things first i want to get the software upgraded.... thanks! Andy _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist