teeray wrote:
Anyone know how a Kurz-Kasch TC-590-89 Test Clip is wired ? All I can find says it should have three test clips E4, B3, D3
Thanks Tim
_
These are part of the KK signature kit for 8080 boards. TC-590-89 is basically a 16 pin Glomper clip with jumpers: Part "EE Module" is a 40 pin header box that have only one jumper between pins 14, 16 & 24. Part "B-3" and "D-3" are a 16-pin glomper clips that each (identical) have jumpers between pins 3, 6, 8, 10, & 13. Part "E-3" is a 16-pin glomper clips that have a jumper between pins 1 & 7. These four parts are used with KKs docs on using the Sig Analyzer on the 8080 boards and go on the corresponding IC (IC B-3, D-3, and E-3). Hope this helps! John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/