I was thinking this as i was reading the OP too :) -- Andrew Welburn http://www.andys-arcade.com ----- Original Message ----- From: "David Shoemaker" <davids@oz.net> To: <jrr@flippers.com>; "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Friday, October 14, 2011 2:28 AM Subject: Re: [Techtoolslist] Reading 9100 floppies...
Not sure what I am missing but why don't you use the tool to make a disk from the image and see if it reads in the 9100?
I would also then archive the copied disk and diff the two image files. If all went right they should match. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/