I received a couple emails inquiring about the SCSI to CF adapter I used so here are the details. Everything you need is currently available at a reasonable price and the physical installation was rather painless. The adapter I used is the Stratos CF AZTECMONSTER and you can buy one direct from Japan http://www.artmix.com/CF_AztecMonster.html but I found it easier and with significantly cheaper shipping to pick one up on ebay. There were multiple listings for the board on ebay yesterday but it appears each had multiple bidders and closed above the starting price. My FLUKE 9100A has the V6 roms installed and was configured using Service Disk 1.4. I have successfully loaded the v4-1b software with the v6.1 update pending availability of new disks (hint-hint Andre)! http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_02.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_03.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_04.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_05.jpg <http://arcadehacking.com/public/fluke/FLUKE9100A_CF_AZTECHMONSTER_01.jpg> I hope this info helps someone else unbrick their Fluke 9100 after a fatal hard disk failure. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/