Hello Everyone, I'm trying to fix my Fluke 9010a tape drive which was working at one point and now is having problems. I'm not having much luck getting it going again and I'm starting to suspect that I might be having an issue with the UPI-41A (Universal Periferal Interface) chip. http://games.rossiters.com/manuals/fluke/Intel-8041A.pdf [1] I know where I can get some of these chips, the problem is they are programmable so I would need someone's help copying the data off a known working Fluke 9010a Tape drive and then have them programmed for me. Does anyone have a programmer that can read/program 8041a/8741a chips? I know the Xeltek SuperPro 3000u can do them. My second option is to find someone who is parting out a Fluke 9010a and get the tape drive from them. I have a bunch of tapes with programs on them I'd like to archive. Is anyone parting out a Fluke 9010a at this time? :) Matt PS - it would be nice to get the ROM off the Fluke 9010a tape drive for preservation purposes! Links: ------ [1] http://games.rossiters.com/manuals/fluke/Intel-8041A.pdf _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/