I believe so, but only Corey seems to have the working disk to answer this. My system has 16mb installed, and tests the 16mb, but again only 4 is available to the OS. Its unclear to me how much of a difference this will make to the system even if it could address the whole 16, i never run into any problems with just 4. Its just nice to know/use seeing its there. I put 32mb in it, but the BIOS test only runs to 16 so there's no point ramming in more than that. Andrew Welburn http://www.andys-arcade.com On 01/06/2015 07:39, William Stillwell wrote:
I have a question...
I have a 9110FT , it has 8 1MB Simms in it giving it 8MB of ram, now, when it boots it does a selftest of the 8MB , but when the software loads it says only has 4MB, does this disk fix that?
William Stillwell Hamster / KI4SWY Stillwell Software Solutions. Free Play Florida Arcade & Pinball Show Organizer
-----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Monday, June 1, 2015 10:16 AM To: Technical Tools Mail List Subject: Re: [Techtoolslist] 9100FT
On 12/14/2013 8:15 AM, Corey Stup wrote:
On 12/14/2013 10:42 AM, Andrew Welburn wrote:
so i went back into the techtools FTP and found the v6 service disk (SERVICE60.TD0), but i get the following error message when i try it out on my 9100FT : http://www.andysarcade.net/pix/DSC_1711.JPG
"Fluke 9100A Service Init Disk, v6.0 This Board Has An Invalid Service ID"
Does this mean it doesn't like the fact its a 9100FT (not 9100A), or does it mean the disk is serialised to a particular machine? (i thought by v6 they had done away with serialisation)
now, there's another disk image on the FTP - 60SERV.dsk - but its in the SAMdisk format, and i dont have an internal floppy drive any more to build and test this one...
could it be that these are two different types of v6 service disk? Can anyone remember which is which? The 6.0 disk was originally serialized. I created a patch to remove the serial check at one point, and I thought I uploaded the patched disk. The 6.0 disk doesn't have the SCSI format tools so you still need the V1.4 disk as well.
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Hi Cory,
I don't have an archive of the deserialized disc image, can you either email it directly to me or upload and I'll put it on the shared directory?
Thanks,
John :-#)#
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/