Mark Hooks wrote:
My Pod Passes self test, yet it won't run a fully working Pac man board. I've tried it using the run UUT defaults. Am I missing something on the setup, or do I have a pod error?
I notice it doesn't pass the buss test either. I get numerous data bit tied low errors. When I loop them, it flips back and forth between Tied Low and OK.
Mark Hooks
I have no trouble running Pacman/Ms with a regular Z80pod, yours must be ill...I have a test jig (I think) for servicing the Z80 pod, somewhere... John :-#)# -- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/