Get that figured out and the 9100A I/O module figured out, and we can just write the software ourselves... I'd volunteer if the hardware interface is worked out. JB --James Bright www.QuarterArcade.com Restored Arcade Games for your Home
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist- bounces@flippers.com] On Behalf Of Mike Coates Sent: Wednesday, April 06, 2005 4:59 PM To: Adam Courchesne; Technical Tools Mail List Subject: Re: [Techtoolslist] Jump start on USB to Fluke pod adapter
neat - get that sorted and we can knock up a new front end with lots of new features.
I keep meaning to look into it, and I have now got the dlp-usb245m module that I may use - very handly little gadget, already hooked it to an arcade PCB to allow me to dump the encryption table.
Adam Courchesne wrote:
I'm taking a graduate course in Real Time Embedded systems and for my final project, am developing a USB to Fluke POD adapter for use with my Fluke 9010A emulator.
So not only do I get to tinker with what interests me but I end up getting credit for it. :-) -Adam _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist