John: Pretty sure I have one of these and a photocopy of the manual as well. Let me dig around and see what I can find. I don't have a scanner......sad isn't it?.......so I will have to get a friend to scan it for you. I'll let you know. May have some sockets as well. Pat On 1/5/2011 7:41 PM, John Robertson wrote:
John Robertson wrote:
Anyone have one of these? I am in need of either schematics or some voltage measurements from the regulator PCB. Just 'won' this off eBay and it really doesn't work (not surprising given the description).
The device looked useful - my assumption was it would generate a CheckSum of an Eprom inserted into the socket - it has four seven-segment displays after all! It uses a Z80 that appears to be wired up as a NOP, but it uses several voltages - perhaps -5 and +12 for the 2708s etc. I only have one socket - 2764-27128, if anyone has any of the sockets I'd be interested in pictures to try to figure out the pinout assuming no schematics or manual turns up that is!
Thanks!
John :-#)#
OK, the regulator board turns off the -12 and +12 unless the TEST button is pressed. I assume that is to protect the Eprom...
Still digging...
John :-#)#
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1191 / Virus Database: 1435/3361 - Release Date: 01/05/11