Thanks very much, Ian: I've been an Emacs user since the 80's and I will actually use this! grant.. On 2018-01-21 8:28 PM, Ian Eure wrote: I’ve had these kicking around in some form or another for a few years, but finally got things cleaned up enough to release. There’s one for 9010a 9LC scripts, and another for TL/1 programs. Both support syntax highlighting and indentation. Probably nobody else cares, but I thought I’d share just in case. I’ve been using Emacs for a good couple of decades now, and I miss it quite a bit when editing on the 9100. [1]https://github.com/ieure/9lc-mode [2]https://github.com/ieure/tl1-mode _______________________________________________ Techtoolslist mailing list [3]Techtoolslist@flippers.com [4]https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: [5]ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: [6]http://seven.pairlist.net/pipermail/techtoolslist/ References 1. https://github.com/ieure/9lc-mode 2. https://github.com/ieure/tl1-mode 3. mailto:Techtoolslist@flippers.com 4. https://pairlist7.pair.net/mailman/listinfo/techtoolslist 5. ftp://ttl.arcadetech.org/TTL/Test_Equipment 6. http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/