https://drive.google.com/file/d/112enhVT6dR2SVuAHScWPAbsKq6YQJV7s/view?usp=s... Is a zip file of all images converted to HFE, known to be good. I can't guarantee the link will stay good, so grab them while you can. You also need to make sure the floppy is set to Sony in the Fluke firmware, else you'll have to ground pin 14 on the floppy connector (Fluke pcb end) or boot a copy of the Service disk as a hard drive image. You can just specify host=fluke in the FF.cfg, see https://github.com/keirf/FlashFloppy/wiki/FF.CFG-Configuration-File On Mon, Jul 20, 2020 at 5:09 PM Tim Matthews <trmatthe@gmail.com> wrote:
Hi all,
I am trying to resurrect a 9100 with dead HD and switch it to SCSI-CF. I have no way of creating a real system floppy so have installed a gotek, flashed it to FlashFloppy 2.14.
Using info from Porchy's site and Tony Jones' post to this list, I've got an FF.CFG set to shugart, jumper on D0 and nowhere else.
I took the kryo stream from 9100A-USAF/SERVICE-V1.4 and using HxCFloppyemulator tool imported the stream and re-exported as both hfe and img.
With both of those files on USB booting softkeys+F2+F4 gets the 9100 trying to boot, but it fails. The gotek shows cylinder reads 0-3, lower side only, for less than a second. Switching the gotek to the second image and rebooting the 9100 has the same result.
I installed the logging gotek FW and can show the gotek is seeing/mounting the images and serving (log excerpt below [0]). I have also tried an FF.CFG with host set to fluke, but the results are identical. I've hooked the gotek to a PC and used it to boot dos floppy images so I know the device, fw and cabling is good (had a different FF.CFG for the pc, but only the interface value).
My converted image details are:
service.hfe: 2,213,376 bytes sha1 f9c6dbf07ab84b3cecaa52a2563b315ffe338beb service.img 655,360 bytes sha1 0dca7b164fcfadfd5cf7eb9be99888318b510408
I am pretty certain the hardware setup is ok, so I think the issue is with the images. If anybody has an hfe or img of the service disk they can point me to I would be incredibly appreciative :D
All advice is very welcome!
thanks,
[0] flashfloppy log excerpt Name: 'service-stream' Type: hfe Attr: 20 Clus: 000000be Size: 2213376 Fast Seek: 1 frags Cache 29 items Cache 105 items Before: After: Current slot: 1/1 Name: 'service-stream' Type: img Attr: 20 Clus: 0000032a Size: 655360 Fast Seek: 1 frags Cache 34 items Cache 105 items _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/