Agreed, I was not able to write the "VerifiedOK" images, as there were errors on some of them. Tony, if you want to loan those disks, I can dump them & verify if they're serialized or not. The Kryoflux hardware shows any areas of the disk which have been re-written. Or duplicates can be made and booted on hardware.
On Apr 25, 2017, at 11:49 AM, Tony Jones <tony@tonyjones.com> wrote:
On Tue, Apr 25, 2017 at 11:38 AM, William Stillwell <ki4swy@gmail.com> wrote: do these have any serial number checks disabled/removed? i need to make a service disk so i can update the ram amount in my 9100ft
Bill. The (removal of the) serialization on the service disk was a topic of a post a couple months ago. The image should be on flippers. I agree, the files on flippers really need cleaning up. I think I determined a while ago that the "verified ok" images are not in fact ok.
The only disks I have are::
9100 Master Disk 1 (v 6.0) 9100 Master Disk 2 (v 6.0) 9100 System Disk 1 (v 6.1) 9100 System Disk 2 (v 6.1) 9100 System Disk 3 (v 6.1)
All have write protect notches set to "protect" but I have no idea if they have been written to (serialized).
Also, on the topic of the disks, the Master Disk 2 label says it contains pods 3548, 3949 and 4050. I've never heard of these cpus before. The only pod I am aware of that's not listed on the label is the V.35 pod.
Tony _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/