Ok so I picked up a BP-1200 base unit (no chip adapter). I went to the FTP site to grab some software and see if I can get it working but can't find a folder for the BP stuff. This unit has a sticker "BPWin enabled" on the bottom. Wondering if that means it will work with a windows version of the software. Any pointers to the software? David -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Clay Cowgill Sent: Friday, August 16, 2013 11:11 AM To: 'Technical Tools Mail List' Subject: [Techtoolslist] BP DOS Software Just FYI, I BIN'd two sets of BP-1200/1400 modules on eBay because I saw they had original software disks included (and I could use some of the adapters...) Assuming the media is good, it looks like it should be 3.17, 3.18, 3.19, 3.20, 3.21, and 3.22. (Apparently they kept their upgrade media while under service contract. ;-) Anyway, that will fill out some earlier DOS software nicely (although I don't have any reason to suspect they'd do anything different/better that the 3.62 or 3.75 copies we already have can do). Once they show up I'll get 'em read in and sent to John. -Clay _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/