I surely don't. The MCLR voltage is only 13 volts, I think, and the current is very low. Could you make one? You might try looking at the PICKit1 schematic for ideas. Jim On Sat, Jun 28, 2008 at 4:43 AM, Steve Larkins <mail@nessandsteve.plus.com> wrote:
Hello all, I was wondering if there is anyone out there that may have some information or even the modules available for the following. - Dataman omnipro2 PIC socket adapter - MQP 200 Pic socket adapter & PROM socket adapter
I think the pic adapters are quite simple but I have been told by mqp that the PROM interface has to handle the high voltage and current involved in programming a prom.
Many thanks Steve _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment