Has anyone tried reading ROM signatures on the Sega G80 boardsets using the Fluke 9010a? I'm getting inconsistent signatures each time I tried to read each rom. I'm able to successfully read/write to the CPU and Vector Rams though. The boards all work fine with a normal Z80 processor installed, but I can't run the game with a Z-80 pod connected to it. Just wondering if anyone else has had the same problem. Matt _______________________________________________
I used the 9010a with the Sega multigame way back in the day and I don't remember any gotchas, but I have seen similar behaviour with a 6502 pod and my Tempest board. (I can't 'run' the game from the pod, although I can examine and test memory just fine.) You might try a different CPU in the pod, or another z80 pod if you have one available. -Clay _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/