On May 16, 2017 11:46 PM, "Ian Eure" <ian@retrospec.tv> wrote: Whoops, correcting this link. It’s https://github.com/ieure/fluke -9100-disk-archive Regarding the contents of the readme file. None of the following was required for my 9100FT or 9105FT. The SCSI2SD is self-terminating so I'm not sure what the rationale is for the insertion of a additional drop/terminator.. "For 9100FT units only: - Replace the SCSI cable with one having three connectors. - Plug a terminator into the far end of the cable. - Remove the the terminating resistor packs from the SCSI2SD" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/