On 5 Oct 2012, at 9:16 AM, John Robertson wrote:
CRC wrote:
On 4 Oct 2012, at 6:05 PM, adolfo bustos wrote:
in a message to techtoolslist-request@flippers.com: techtoolslist@flippers.com Prom Burner B&C Microsystems, Model 1409C Anyone know the Program "" Burner.exe "" compatible IBM .- for Universal E(e)prom Programmer B&C Microsystems 1409C Programmer Model 1409C ver 10.2CT Any info would be greatly appreciated. Thanks, Adolfo _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Adolfo -
I begged a copy of an older version of their "burner" program a while ago. It supports the 1400 and 1400/87. There is a slightly newer version, but it wouldn't work with my 1200.
I put the program at: <https://www.dropbox.com/sh/ztgxu9w53n08aba/j2nxmKCAWD>.
You might drop support at BP a note asking for a later version that supports your programmer.
Beware, I found that this program will not run on a current PC - I had to dig up a 500 MHz ancient box to run the programmer.
I hope this helps ->CRC _______________________________________________
If you can zip that up I'll add it to the archives...
John :-#)#
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Alas, a brain fart - it was meant to be zipped. The Z-version can be found at <https://www.dropbox.com/s/4iljk5ecm066rje/BPWin.zip> ->CRC