9100 tests any bit-size of ram natively with masking, no need for any programming... so non 8-bits a 9010 problem apparently... Andrew Welburn andys-arcade On 5/28/2023 1:59 PM, John Robertson via Techtoolslist wrote:
On 2023/05/28 12:55 p.m., davids@oz.net wrote:
Have a suspect bad pallet ram on Missile Command, and I see that it is on the CPU memory map so I should be able to get to it from the fluke.
Now it is only 4 bits wide (and only uses 8 addresses) so I can just do it manually but I have seen this on other boards before and never could find a way to use the fluke to test these 4 bit rams.
Would also assume it could be a problem for 68000 based boards which use 16bit wide memory.
David
Yes, I've grumbled about this in the past too. Many games ues 5101s for battery backup memory andother than poking numbers like AA and 55 at the memory space and ready it back it can't be easily tested.
I though of making a simple 4-bit memory device that would cover the other data lines and it would also match the memory map for the UUT 5101, but never got around to it as the AA/55 test worked pretty good just picking a few locations. One alternates the test number and reads the space one is going to write to make sure the RAM isn't mirroring the same data throughout.
It would be nice to make a good 4-bit memory test for the 9010A and the 9100X - if someone wants to write and share it here I'm sure they would earn lots of Karma!
Currently I'm trying to pull the Gottlieb System 80 test out of Ian Eure's much appreciated Github archive:
https://github.com/ieure/fluke-9100-disk-archive
to take a look at it (how does it handle the 5101 testing?), I just don't have the time at work, and no XP/AT/W95/XT computer at home to convert the files into something I can read...
Time, eh, the big enemy!
John :-#)#
PS, I'm going to change TTL so it replies to the list, not the poster, it keeps throwing me and I suspect may annoy others. I know it SHOULD do a reply to poster, but I prefer these discussions in public unless the participants choose to go to private email (which is just fine), so we all can benefit from sharing the knowledge, as well as errors made and learned from...
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site 2005-Current: https://seven.pairlist.net/pipermail/techtoolslist/ Vectorlist Archives 1997/99 - 2016: https://www.vectorlist.org/