Open filament in the display tube? Look at it in the dark for tiny red stripe. On 8/8/2017 3:05 PM, robert via Techtoolslist wrote:
my fluke 9010a rev 3a is not booting the diplay doesnt go on i think its a watchdog problem i have the service manual but it doesnt seem to cover the 3a rev firmware for the rom signatures all my power test points are good and also i get a beep when power on but no display does anyone have any idea what could be the cause of the shutdown _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/