Nice work Colin! On Fri, 6 Jan 2017 at 23:41, Colin Davies <colin.w.davies@btopenworld.com> wrote:
Hi Guys,
As part of the Slapstic reproduction module project, I've now got a viable
test rig setup based on an arduino uno board plus a custom test wing with a
zif socket.
Hope to have a few of these available for sale soon..... although only had a
few pcb's made.
With a stroke of luck I was able to fit an RGB led module to the design with
minimal changes.
This should be able to identify and test Slapstic's from 103 > 118.
Video below showing test of Multi Module V2 (103>110) set to 103.... notice
the 3 flashes to Id the chip too !!
Regards,
Col
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/