Has anyone here figured out an adapter for one of the Fluke 9010 pods to be able to emulate the multiplexed address and data lines of the T11? I am just starting to look at this as I need to access these lines to service an old video game board that used the T11 as the main processor. Any of you not familiar with the DEC-T11 it is a 40 pin device that emulates a PDP11 as far as I can understand. I don't know anything about the PDP11 technically though so am pretty much hacking my way through inventing a troubleshooting procedure, which the manufacturer of the game - Atari (System 2, Paperboy, AFB, etc,) - did not provide. Just flinging this out in the hopes someone here can help. Thanks, John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/