Hi John I need an adapter for my Z8000 pod any chance you have on set spare still? On Sat, 27 Oct 2018 at 02:28, John Robertson <jrr@flippers.com> wrote:
On 2018/09/04 9:00 PM, John Robertson wrote:
On 2018/09/04 8:42 PM, John Robertson wrote:
I have a Z8000 pod and am in the process of making a PCB for the Z8001 test socket on it so I can test Z8002 (Pole Position of course) logic. The PCB is to adapt the Z8002 CPU to the Z8001 test socket.
I will likely be making two or three of these (minimum quantity) so if anyone is interested in one for their Z8000 pod please let me know - @ cost plus postage. I plan on having the PCBs run off either later this week or next.
John :-#)#
Right, just remembered that I need two of these, one to load the Z8002 in the Z8001 socket on the Z8000 pod, and a second to take the 48 pin cable's UUT Z8001 plug and convert that to the 40 pin Z8002 socket on the PP board.
So, will be making these in pairs. Anyone else interested in a pair?
John :-#)#
I have had the Z8002 adapter boards made now, and I have two spare pairs - and three others which are spoken for. $10USD per PCB pair plus postage ($10USD to USA) for TTL members only.
Note this is for a single pair of bare boards, you will need sockets and headers...
John :-#)#
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/