Many 9010's don't have RS232...I had considered making a board, but, heck, too little free time these days! Should be quite easy to make, but who wants to do it? I think a bare board that folks can use their own junk parts on would be best, and cheapest. I wonder if one could take an old PC serial card and jam it in with a jumper interface (hah!). Be nice to have 112Kb for example! John :-#)# At 6:16 PM +0000 2/26/05, Martin White wrote:
I've only just installed a PC anywhere near the 9010 :)
Maybe now, not much use, but they would have been...
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Mike Coates Sent: 26 February 2005 18:09 To: Technical Tools Mail List Subject: Re: [Techtoolslist] WTB:Fluke 9010A Tapes
with FIDE installed what use are the tapes anyway ... ?
(at least I find it easier to use than tapes anyway)
I got 5 tapes from the recent ebay listings and 'lo and behold as soon as i go to use them i find the tape deck no longer works even though it definately used to.
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
-- John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames) www.flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist