I have one sitting around that does smaller eproms, may be ideal for what you want. I got it from ebay and never used it, so no idea if it works, but bung me your address and I'll send it to you so you can give it a try! failing that, grab a small flash ram as used by PC graphics cards etc, as you can reprogram it without all that UV rubbish which makes it quicker to do. I used them for doing the multigame On 02/01/2011 17:11, Martin White wrote:
Hmm, as interesting as that looks, I was rather hoping for something that doesn't cost hundreds of dollars having already spent a bucket load on the kit that I have. I'm not 100% clear from the description on the site of what size eproms it emulates either. I'd want it to emulate a 2716. And I also don't have a parallel port. Maybe there's something similar that doesn't cost so much though?
On 2 Jan 2011, at 16:31, Tony G. wrote:
Yes. I am devloping a 65C02 based pinball machine. I am using an eprom emulator
I can now run code, change it, download it into the unit and rerun literally within 20 seconds or less. The transfer is under 5 seconds and most of that time is saving and pointing to the right directory.
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/