It does make sense, doesn't it....it would be extremely weird to put +5V on that pin..... Actually....looking at the schematics again it looks like the monochrome monitor is actually FEEDING BACK the +5V judging by the "arrow" going "into" the connector... However, I have a problem now.....I need +5V for the 74LS04....and I don't want to make this a messy job....so I think I'll switch to this: http://www.mikesarcade.com/wiretap/info/SyncInv.pdf Guess I'll have to order a 74C04.... Op 16 nov. 2012, om 23:38 heeft David Shoemaker <davids@oz.net> het volgende geschreven:
I have used a normal cga monitor on mine before. I don't remember doing anything special to use it. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
André Huijts andre.huijts@upcmail.nl _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/