Rummaging around the net I found, at Honeywell, the following CD: http://www.honeywelltraining.com/LearningTools-Interactive.asp ---------------------------- The interactive system CD-ROM program is designed to familiarize and prepare avionics bench technicians for troubleshooting microprocessor circuits using the Fluke 9010A Microprocessor Emulator and other testing tools. This course is broken down into five sections. Section 1 is an interactive description of the X86 microprocessor. Section 2 exemplifies the role of the microprocessor circuitry with interactive operations description of RAM, ROM, decoders, Buggers and I/O devices. Section 3 deals with the operation of the interactive troubleshooting complete with probable circuits and a software emulation of the Fluke 9010A Troubleshooter. The first five certificates are awarded at no charge. Additional certificates are awarded at a cost of $50.00 each. Honeywell Item ID# CD8150-05 ($500US! - ouch) ----------------------------- Has anyone heard of this? Or have anything that might be of use? I am going to be scanning in my copies of the Fluke Troubleshooter over the next week or so for uploading to Spies (or somewhere else for sharing, flippers.com is getting fulllllllllll.....) John :-#)# To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request@flippers.com. Please direct other questions, comments, or problems to jrr@flippers.com.
John, I work for Honeywell and almost had a copy a few years back. The problem being that Honeywell were taken over by Allied Signal and the office that delt with this CD was closed. I had a mail saying that it would be mailed Thursday then I got another mail next morning saying that the office was no more so don't bother us again. I did try again but there was indeed no answer. Now that things have calmed down a bit I could phone the responsible parties again and see if I have any more luck. If I get any joy i'll let the list know. Regards Peter ----- Original Message ----- From: John Robertson <jrr@flippers.com> To: <techtoolslist@flippers.com> Sent: Thursday, January 31, 2002 4:56 AM Subject: Fluke 9010A (what else?)
Rummaging around the net I found, at Honeywell, the following CD:
http://www.honeywelltraining.com/LearningTools-Interactive.asp ---------------------------- The interactive system CD-ROM program is designed to familiarize and prepare avionics bench technicians for troubleshooting microprocessor circuits using the Fluke 9010A Microprocessor Emulator and other testing tools. This course is broken down into five sections. Section 1 is an interactive description of the X86 microprocessor. Section 2 exemplifies the role of the microprocessor circuitry with interactive operations description of RAM, ROM, decoders, Buggers and I/O devices. Section 3 deals with the operation of the interactive troubleshooting complete with probable circuits and a software emulation of the Fluke 9010A Troubleshooter. The first five certificates are awarded at no charge. Additional certificates are awarded at a cost of $50.00 each.
Honeywell Item ID# CD8150-05 ($500US! - ouch) -----------------------------
Has anyone heard of this? Or have anything that might be of use? I am going to be scanning in my copies of the Fluke Troubleshooter over the next week or so for uploading to Spies (or somewhere else for sharing, flippers.com is getting fulllllllllll.....)
John :-#)#
To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request@flippers.com. Please direct other questions, comments, or problems to jrr@flippers.com.
participants (2)
-
John Robertson -
Peter Fyfe