My Fluke 9010a RAM problem - Again !
Hi ! This is the 3rd time I have RAM problems with my Fluke 9010a. Always the same behavior. After a couple hours of working, turned the system off and when turn-on again, show garbage on the display. The first and second time, I've decide to troubleshoot what IC was damage, and replaced with new ones. Now I've decide to change all 8 RAM ICs with NOS ones. The weird is that my system is not used very often. Do you guys experienced some similar problems ? Thanks, JL _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
On 03/18/2013 10:35 AM, Jose Luiz Martins wrote:
Hi !
This is the 3rd time I have RAM problems with my Fluke 9010a.
Always the same behavior. After a couple hours of working, turned the system off and when turn-on again, show garbage on the display.
The first and second time, I've decide to troubleshoot what IC was damage, and replaced with new ones.
Now I've decide to change all 8 RAM ICs with NOS ones.
The weird is that my system is not used very often.
Do you guys experienced some similar problems ?
Thanks,
JL
Usually only see results like that when there is either a line voltage drop or power supply issues... John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
participants (2)
-
John Robertson -
Jose Luiz Martins