Again, i'm not in a position to check since my 29B is on the floor and not connected to any mains or anything right now, but format 16 - Absolute binary rings a bell.... Martin. On Monday 21 March 2005 18:59, wkarkula@comcast.net wrote:

It may be your file format. I'm not at my machine to check but see what file format the 29B is set up to accept. If I get a chance I'll research it. It's one of those things that once I got it set up correctly, I never worried about it again.

Bill

-------------- Original message --------------

...

I used a standard serial cable with a null modem adapter. The 29B must be talking correctly to Promlink or I wouldn't be able to burn, verify blank, see checksums, configure it for different devices, etc. No?

Message: 2 Date: Sun, 20 Mar 2005 17:10:08 -0800 From: John Robertson Subject: Re: [Techtoolslist] Data I/O 29B and Unipak 2B problem loading RAM from serial port and Promlink To: Technical Tools Mail List Message-ID: Content-Type: text/plain; charset="us-ascii" ; format="flowed"

Do you have all the RS-232 signals that the 29B uses hooked up?

John :-#)#

At 6:52 PM -0600 3/20/05, Robert C. Bullock wrote:

...

When I load RAM from Master, the PROMs burn fine. When I load RAM from a disk file, it stops at 100% and says 'Waiting on programmer...' (or very

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist

Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist